Grilles Сarrera

Set S

For internal floor convectors, it allows you to expand the variations in the interior of the premises to make the heater not just an integral part of the heating system but a part of the design with the possibility of transformation for various tasks in the interior. The 4S, S (90 and 120), S Hydro (105 and 120), and SE convectors are completed with the S set: a removable decorative frame and grille (standard – Satin color). The frame hides the joint between the floor covering and the convector body, after which the convector looks harmonious in the interior. The frame is installed on top of the finished floor. This set is installed only under Carrera convectors with index S, not in other Carrera convectors models.

Frameset S:

— with index ZN — has a profile width of 10mm, provides concealment of the joint between the floor covering and the convector body 5mm.

— with the ZL index — the increased profile width is 20mm, which hides the joint between the floor covering and the convector body up to 15mm.

Grilles Carrera for set S: aluminum (transversal, longitudinal), HI-TECH (aluminum transverse on an elastic-plastic band), wood (transversal), stone. Satin frame and grille as standard.

Carrera Standard Grilles

Carrera convectors are equipped with standard grilles: aluminum in two versions (transverse, longitudinal), stylish HI-TECH grilles (aluminum transverse on an elastic-plastic tape), and wood with rounded corners (transverse). Suitable for convectors C (height 90mm and 120mm) and sets S. Convector C design with a decorative frame and further installation of a structure or a decorative corner are possible. That provides an abrupt transition from the convector body with a grille and floor covering. For models M and C with a height of 65mm, an aluminum grille 65 New (transverse) with a size of 10mm has been developed.

Wooden grille WR

Carrera decorative grilles are made from natural hardwood and can be made in different widths and lengths.
The grille lamellas are transverse and have rounded corners. It is possible to paint the wooden lattice (according to the RAL palette for wood) and the frame (according to the RAL palette).
Suitable for convectors: 4S, S, SE, C, body height from 75mm.

Carrera grilles made of decorative Stone

Decorative grille with a unique carved pattern. It can be installed in S-model convectors with 90mm and 120mm body heights. Permissible grille width: 230mm and 300mm—production according to RAL Stone color.