Convector M 65
-
Natural convection
-
Enclosure with a minimum height
-
2-pipe heat exchanger
-
Grilles complete set
-
Housing version - Black, Inox
The case features a minimum height
The convector bodies in the M/C 65 series have the most diminutive height among the entire range of Carrera convectors. The body height is 65 mm, which allows installation in rooms with a small screed thickness. All parts of the convector body are made of high-quality sheet steel (stainless steel is available on request). Also, the pieces are painted with a wear-resistant black powder coating, which makes all the convector components invisible under the grilles. The housing provides a connection to the heating system from 3 sides, and the free holes are closed with plastic-sealed plugs to prevent the solution from entering when pouring the convector. Adjusting bolts are installed at the ends, with the possibility of height adjustment within 40 mm, for the convenience of setting the device during installation. The M model has a non-removable frame 8 mm wide, which closes the joint between the cover and the installed convector. Model C without decorative corners is also provided.
2-pipe copper-aluminum heat exchanger
In the M/C 65 Carrera series, 2-pipe heat exchangers of our manufacturer are installed. Each heat exchanger undergoes testing and output control at the factory. It consists of high-quality components (copper and aluminum) from European manufacturers. The compact and thoughtful design of the heat exchanger will provide heat to a relatively large area of the premises with a minimum width of the convector and a minimum depth. It also has the function of stiffening ribs due to the cassette design of the mounts and supports of the heat exchanger and is easily removed if cleaning or maintenance is required.
No noise and simple design
Thanks to anti-vibration inserts in the cassette mounts of the heat exchanger and the convector body, the M/C models are silent and easy to install and operate. Convenient fixings of the heat exchanger make it easy to remove and service the convector. The M/C series is equipped with 1-2 or more heat exchangers, which allows you to effectively increase the heat output for heating any premises. Model M has a non-removable frame that closes the joint between the convector and the floor 8mm and a metal grille 65 NEW, 10mm high. Model C is equipped with a grille 65 NEW, without the possibility of further installation of the frame.
Characteristics Convector M 65
| M/C height 65mm with 1 heat exchanger | |
|---|---|
| Width | 230mm |
| Length | 1000-3000 mm in 250 mm increments |
| Convector housing options | Black, Inox |
| Equipment height adjustment range | 0-40mm |
| Grille – set S (ZN, ZL) | transverse (aluminum) |
| Heating medium connection | G 1/2″, left side |
| Optimum working temperature | 40 – 90°c |
| Max. working temperature | 105°c |
| Operating pressure | 10/16 bar |
| Body and heat exchanger guarantee | 10 years |
| Electrical part guarantee | 2 years |
Download documents
| M2/C2 height 65mm with 2 heat exchangers | |
|---|---|
| Width | 380mm |
| Length | 1000-3000 mm in 250 mm increments |
| Convector housing options | Black, Inox |
| Equipment height adjustment range | 0-40mm |
| Grille – set S (ZN, ZL) | transverse (aluminum) |
| Heating medium connection | G 1/2″, left side |
| Optimum working temperature | 40 – 90°c |
| Max. working temperature | 105°c |
| Operating pressure | 10/16 bar |
| Body and heat exchanger guarantee | 10 years |
| Electrical part guarantee | 2 years |
Download documents
Grilles for floor convectors
Grilles Сarrera