Convector 4S

  • Natural convection
  • Enclosure with a minimum width
  • 4-pipe heat exchanger
  • Grille set - Set S
  • Housing version - Black
Where to buy

The case features a minimum width

The convector bodies in the 4S series have the smallest width among the entire range of Carrera convectors. All parts of the convector body are made of high-quality sheet steel (stainless steel is available on request); also, the pieces are painted with a wear-resistant black powder coating, which makes all the convector components invisible under the grilles. The housing provides a connection to the heating system from 3 sides, and the free holes are closed with plastic-sealed plugs to prevent the solution from entering when pouring the convector. Adjusting bolts are installed at the ends, with the possibility of height adjustment within 40 mm, for the convenience of setting the device during installation. The model is intended for grille set S (consisting of a frame and a grille), which is placed in the mounted convector and closes the joint between the cover and the installed convector.

4-pipe copper-aluminum heat exchanger

In the 4S Carrera series, 4-pipe heat exchangers of our manufacturer are installed. Each heat exchanger undergoes testing and final control at the factory. It consists of high-quality components (copper and aluminum) from European manufacturers. The compact and thoughtful design of the heat exchanger will provide heat to a relatively large area of ​​the premises with a minimum width of the convector. It also has the function of stiffening ribs due to the cassette design of the fasteners and supports of the heat exchanger, and it is easy to get in case of need for cleaning or maintenance.

Advanced heating technology for your home

The 4S series is equipped with 1-2 or more heat exchangers, which allows you to effectively increase the heat output for heating any premises. It is completed with a decorative frame and a grille specially designed for the 4S model.

Advanced heating technology for your home

Thanks to anti-vibration inserts in the cassette mounts of the heat exchanger and the convector body, the 4S models are silent and easy to install and operate. Convenient fixings of the heat exchanger make it easy to remove and service the convector.

Characteristics Convector 4S

Convector model:
4S
4S height 110mm with 1 heat exchanger
Width 180mm
Length 1000-3000 mm in 250 mm increments
Convector housing options Black
Equipment height adjustment range 0-40mm
Grille – set S (ZN, ZL) transverse, longitudinal (aluminum), wooden, stone
Heating medium connection G 1/2″, left side
Optimum working temperature 40 – 90°c
Max. working temperature 105°c
Operating pressure 10/16 bar
Body and heat exchanger guarantee 10 years
Electrical part guarantee 2 years

Download documents

4S-draft

4S-render

Catalog. Series 4S 110

4S2
4S2 height 110mm with 2 heat exchangers
Width 250mm
Length 1000-3000 mm in 250 mm increments
Convector housing options Black
Equipment height adjustment range 0-40mm
Grille – set S (ZN, ZL)  transverse, longitudinal (aluminum), wooden, stone
Heating medium connection G 1/2″, left side
Optimum working temperature 40 – 90°c
Max. working temperature 105°c
Operating pressure 10/16 bar
Body and heat exchanger guarantee 10 years
Electrical part guarantee 2 years

Download documents

4S2-draft

4S2-render

Catalog. Series 4S 110

Grilles for floor convectors

Grilles Сarrera